Is Bright Way Replacement Breakaway Switch 2348 Available

Question

Question:

Looking for a Bright Way Group complete switch assembly, Bright Way product # 2348

asked by: Paul H

0

Expert Reply:

We do have exactly what you are looking for, the Replacement Breakaway Switch for Bright Way Trailer Breakaway Kits # 3802348.

The "380" in front of the 2348 is just our part number identifier that we use for Bright Way products. For example, the Replacement Cable and Pin for Bright Way Trailer Breakaway Kits # 3802350 is part 2350, but also has the "380" in front of it.

I have added a link to a video review for you to check out as well of the Replacement Breakaway Switch for Bright Way Trailer Breakaway Kits # 3802348.

expert reply by: Kyle S

0

Answer 1

Hey Jeff, You do not need to purchase the whole switch you found, the replacement Cable and Pin #3802350 is the replacement parts you're looking for.

view full answer...

Answer 2

If you still have the plunger end that goes in the break away switch, then you can simply insert the plunger back into the switch and that should cut off the power to the brakes on your trailer. If you no longer have the plunger, then you can either…

view full answer...

Answer 3

Pushing the pin back into the breakaway switch should allow the brakes of the trailer to release. You may have to back the trailer up slightly to get the brakes to release. If you have tried that and are still having problems you may need to replace…

view full answer...

Answer 4

There are several things that could be causing your trailer brakes to no longer work but a circuit breaker in the trailer battery compartment would not be one of them as this should have no bearing on the brake output circuit if wired properly. The…

view full answer...

Answer 5

The replacement pin and cable you need for your Bright Way breakaway switch part #3802348 is the part #3802350!

view full answer...

Answer 6

It sounds like the 6K might be referring to 6,000 pounds although I cannot be 100 percent sure on that. I could tell you for sure if you could tell me the inner and outer bearing numbers stamped in to the bearings. A 7K axle will use inner bearing…

view full answer...

Answer 7

The Replacement 42" Cable for Breakaway Switch #3802350 is compatible with your certain models of Bright Way breakaway switches. If you only need the cable, this will work for sure. The pin is intended for models 2307, 2308, 2326, 2336, 2337,…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Is Bright Way Replacement Breakaway Switch 2348 Available

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching