4 Foot Hose to Connect Propane Tank on Travel Trailer to Regulator

Published 05/12/2020

Products Featured in This Question

MB Sturgis Propane Pigtail w/ Back Check - Type 1 x 1/4" Male Inverted Flare - 4'

(1859)

$25.12

MB Sturgis Propane Adapter Fitting w/ Back Check - 1/4" Female Inverted Flare x 1/4" MPT

(248)

$6.86

Thread Sealant Tape for Gas Lines

(90)

$10.10

Question:

Need longer lp hose,from trailer to regulator. Measured flare .750 outside dia, on tt .665 mpt going to regulator. Need 48inches length

asked by: Rob M

Expert Reply:

We have 48 inch hoses to go from a propane tank to a regulator but your fittings don't seem to match standard sizes. A trailer normally has tanks with a Type 1 connection and the standard inlet on regulators is 1/4 inch NPT. Send me some pictures if yours seem different.

A 48 inch hose that works for the standard fittings is part # 100575-48-MBS.

For this hose you also need an adapter, part # 204120-MBS. Ths converts the inlet on the regulator from 1/4 inch NPT to 1/4 inch FIF. The only 4 foot hoses we have need the adapter but the FIF connection is easier to deal with so I recommend it anyway. It doesn't require tape on the hose connection but you still need tape, like part # 37207-30025, to insert the adapter into the regulator.

expert reply by: Charles S