Replacement for 31 Inch Slipper Springs on Small Trailer
Updated 05/04/2020 | Published 05/01/2020
Question:
Do you have 31 leaf springs 2 leaf - small trailer it has one open eye with bolt on one side.
asked by: James
Expert Reply:
The closest leaf springs we have to what you're describing is part # e29SR. these are 30 inches from the center of the eye to the very end of the slipper end. One thing to keep in mind is your springs are going to be longer than they were when they were new because springs flatten over time.
Before purchasing springs you should find out your trailer's axle capacity because the number of leaves isn't an indication of capacity. These springs are for 1,800 pound axles. Also, make sure your springs are 1-3/4 inches wide.
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1800 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 30 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: front hanger
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Shop: 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Search Results: trailer hub
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Video: Checking Out the 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles
- Q&A: Replacement Axle for a 1990 EZ Loader Boat Trailer
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Search Results: trailer leaf springs
- Search Results: trailer lights
- Article: Slipper Spring Trailer Suspension System Review
- Video: Feature Breakdown: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles
- Shop: CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Search Results: square axle
- Search Results: hubs
- Q&A: Replacement Axle Recommendation for 49.5 Spring Center and 59.5 Hub Face Measurements
- Q&A: Which Way Should Bow of Trailer Axle Face When Installed on Trailer
- Q&A: Any Leaf Springs Designed for Boat Trailers Used in Salt Water
- Q&A: Can 1 Inch Trailer Hub Bearings Replace 1-1/16 Inch Bearings
- Search Results: slipper springs
- Video: All About the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Q&A: Option Because No Trailer Leaf Springs are Long Enough
- Q&A: Availability Of A 31-1/4 Long Double Eye Leaf Spring
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Video: Ultimate Overview of the CE Smith Wobble Roller for Roller Bunks
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
on Trailer Leaf Springs
