Converting 2010 Coleman Niagara Single Step to Double Step

Updated 04/30/2020 | Published 04/29/2020

Products Featured in This Question

Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs

(867)

$162.21

Mounting Hardware for Lippert Electric and Manual RV Steps

(33)

$41.12

Lippert Outriggers for Manual RV Steps

(42)

$67.29

Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 20" Wide - 300 lbs

(663)

$283.38

Question:

I want to replace the single step on my 2010 Coleman Niagara with a double step. The issue that arises is that Coleman uses some kind of spacers on its steps- the step is 20inch wide, and the hangers are 24.5inch wide- too narrow for a 24inch replacement, and too wide for a 20inch replacement. Advice?

asked by: Matt C

Expert Reply:

For your 2010 Coleman Niagara, the dimensions you gave are a big help. There isn't a perfect fit for the current setup, so you will need to use what is called an outrigger. You can use the Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 20" Wide - 300 lbs # SMFP-2120 along with the Lippert Outriggers for Manual RV Steps # LC301704 to give you the correct fit and stability. You will use hardware # LC118155-72 to make them compatible.

Note--You may use an Outrigger on one side and factory mount on the other.

expert reply by: Jason S