Troubleshooting LF Error on Lippert Ground Control System

Updated 03/04/2020 | Published 03/03/2020

Question:

I have a LCI Electronic Leveling and continuously getting LF Jack error reading. Looking for guidance.

asked by: Doug M

Expert Reply:

The LF error on the Lippert Ground Control System # LC358590 indicates you have an issue with the left front jack or some kind of short or failed power source (like a dead battery).

To clear that message Lippert states that you need to extend all of the jacks at least 6 inches. You will then press and hold the retract button until all the jacks begin retracting. Doing this should clear the error code but you will still want to try and track down the reason for the fault if you haven't already.

I recommend inspecting the wiring for any frayed or damaged portions that need to be replaced. Also make sure your battery is fully charged and in good condition.

If the above method doesn't clear the code or the code pops back up again and you can't locate the cause please let me know and we can troubleshoot further.

expert reply by: Jameson C