Oil Bath Hub That Can Replace Grease Hub # AKIHUB-865-7-1-EZ-K
Updated 01/09/2020 | Published 01/08/2020
Products Featured in This Question
Question:
can i use this hub on a 7000 lb 9/16 stud and 8 on 6.5?, or do you have any hub for oil? i use now AKIHUB-865-7-1-EZ-K but i want use oil not grease thanks
asked by: Cristian G
Expert Reply:
The trailer hub part # 008-399-91 will fit on your axle that currently has the # AKIHUB-865-7-1-EZ-K installed as both of these hubs fit the same dimension spindles. This is an oil bath setup like what you are wanting and comes with everything needed to install aside from gear oil. The big difference between grease and oil bath hubs is the seal and the cap which this hub comes with.
Product Page this Question was Asked From
Dexter Trailer Hub - Oil - 8 on 6-1/2 - E-Coat - 9/16" Bolts - 8,000 lbs
- Trailer Hubs and Drums
- Idler Hub
- Oil Bath
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Q&A: Replacement Spindle Nut and Tang Washer for Dexter 10k Axle
- Q&A: Replacement Trailer Rim With A 4,000 Plus Capacity
- Q&A: Can Grease be Used in Oil Bath Hub
- Q&A: How To Convert Dexter Electric Drum Brakes to Hydraulic Disc Brakes on 10K Axle
- Q&A: Comparing Benefits of Greased Hubs vs Oil Bath Hubs
- Q&A: Cross Referencing a Dexter Hub with 70-7 Stamped On It