Largest Tire and Wheel With 4 on 4 Bolt Pattern for Long Trip
Published 12/31/2019 >
Products Featured in This Question
Question:
Largest Replacement Tires Possible for 1982 Coleman Sun Valley with 20.5 x 8.5-10 Tires. I am looking for a wheel/tire combination for my rebuilt 1982 Coleman Sun Valley camper. Today I have 20.5 x 8.5-10 tires load rating E on standard 4 lug, 6 inch wide rims. I would like to reduce the revolutions/mile without compromising on tire durability 6000 mile highway trip coming up. I would also like to increase trailer height. going off road If I can go to a 12 inch wheel by doing an over/under conversion for chassis/body/tire clearance, I would go that route. What are your thoughts / ideas?
asked by: Al C
Helpful Expert Reply:
So you may be able to use the over/under kit you were talking about to get the needed clearance (at least 3" of clearance from the top of the tire to your fender and at least 1" of clearance between the inside of the tire and your trailer's frame rail), but that depends on the size of your axle. If it is a round, 2-3/8" axle you can use the Over-Under Conversion Kit # K71-384-00. Sounds like you have a 4 on 4" bolt pattern, and if so you could then use the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel # AM35351DX and you'd have a great set up. This is a larger, 21.3" diameter wheel and tire combo.
Apart from that, the best recommendation I can make for your trailer with 10" x 6" wheels like part # AM20041 is to replace its tires with similar size, but higher-quality tires to what you have now. The best option which will fit this size wheel is the Loadstar K399 Bias Trailer Tire # AM1HP56 which is a 10-ply tire that has an 87 mph speed rating for your long trip.
I have added links to video reviews for you to check out as well.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Q&A: How to Lift 2025 Keystone Coleman 17B
- Q&A: Adding Lift to 3,500 lb Trailer Axle
- Q&A: How To Get Full 2-1/4" Lift With Correct Track Trailer Alignment and Lift Kit For Tandem Axle RR23QX
- Q&A: 2024 Forest River Wildwood X-Lite 273QBXL
- Q&A: Recommended Axle Flip Kit for a 3,500 lbs Drop Axle
- Q&A: Replacement Hub/Drum and Bearings for 2006 Carmate Trailer With Dexter 8-247 Assembly
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Can Dexter Over Under Kit Be Used To Lower a Trailer? To Go from Over To Under?
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review




