Correct Hanger Spacing Using Triple-Axle Hanger Kit With 3,500 Lb 25-1/8 Inch Long Leaf Springs
Updated 11/26/2019 | Published 11/25/2019
Products Featured in This Question
Question:
what is the hanger spacing for the 25-1/8 springs e54SR and three 3,500 lb axles. I have the APTT5 hanger kit. Thanks
asked by: Larry W
0
Expert Reply:
The correct hanger spacer when using the Triple-Axle Trailer Hanger Kit part # APTT5 with the 4-Leaf Double-Eye Spring part # e54SR is 29-1/2" from the front hanger to the center hanger, 34" between the center hangers, and 29-1/2" from the second center hanger to the rear hanger. Please note, you will also need the U-Bolt Kit for Mounting Kit part # APUBR-1 in order to mount the leaf springs to the axle.
expert reply by:
Conner L
0
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine Correct Leaf Springs For 2018 Jayco Travel Trailer
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Q&A: Replacement Leaf Springs and Hardware for 2022 Forest River Platinum 179DBKX
- Q&A: Troubleshooting Slanted Equalizer on Unloaded 7K Cargo Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Determining the Correct Leaf Spring Length for Trailer
- Article: How to Raise Your Travel Trailer Height
- Q&A: Correct Replacement for Dexter Leaf Spring 072-078-00