Can 2013 Nissan Frontier 4 Wheel Drive be Flat Towed behind Motorhome
Published 11/19/2019 >
Products Featured in This Question
Question:
Can you flat tow 2012 two 2013 Nissan frontier 4 x 4 automatic
asked by: Dennis
Expert Reply:
It is possible to flat tow a 2013 Nissan Frontier 4x4 with an automatic transmission but you'll need to have a driveshaft disconnect installed on the truck. We do not carry these but we do have everything else you'd need. If you need help finding a source for a driveshaft disconnect let me know as I can help point you in the right direction.
First thing you'll need is a base plate kit like the # 344-1B which was custom made to fit your Frontier.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terrain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Product Page this Question was Asked From
Demco Commander II Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount
- Telescoping - Non-Binding
- Steel
- 6000 lbs
- Fits Demco Base Plates
- Stores on RV
- Cables Included
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Parts to Flat Tow a 2023 Ford Maverick Hybrid
- Q&A: Parts Needed to Flat Tow a 2022 Jeep Wrangler Rubicon
- Q&A: Complete Flat Tow Setup For 2014 Jeep Wrangler
- Q&A: Recommended Tonneau Cover and Compatible Ladder Rack for a 2026 Ford Maverick
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Q&A: Is Demco Stay IN Play DUO Inline Air Pressure Regulator Needed For 2025 Ford Maverick Hybrid
- Article: Flat Towing Package for 2008-2011 Honda CR-V
- Q&A: Recommended Bumper Mounted Baseplate for a 2002 Jeep Wrangler Sport w/ the Factory Bumper
- Q&A: Is it Possible for Yakima Overhaul HD Ladder Rack to Fit with Truxedo Tonneau Cover
- Article: Flat Towing Package for 2006-2007 Chevrolet HHR
- Article: Flat Towing Package for 2012-2014 Honda CR-V
- Article: How to Choose a High-Low Adapter
- Article: Base Plate Adapter Table
- Article: Flat Towing Package for 2005-2007 Jeep Liberty


