Replacement Motor for Lippert Components PSX2 Electric RV Stabilizers

Updated 10/14/2019 | Published 10/13/2019

Question:

I have a new Rockwood travel trail that has dual PSx2 motors for front and rear jacks. If one goes bad can I replace just the one or do I have to buy the whole assembly. Also is there replacement instructions.Also can the jack still be used manually if the motor goes bad

asked by: Garry S

Expert Reply:

Yes, the motor for the Lippert Components PSX2 Electric RV Stabilizer can be replaced without obtaining an entire new system. The Replacement Motor and Gear Box Assembly for Lippert Components PSX2 Electric RV Stabilizers part # LC759091 is what you will need for this. The motor and gear box assembly come as one unit and must be replaced together.

I suggest keeping one spare motor/gear box on hand so you never have any down time but if worse comes to worse you can still operate the jack with a bad motor and or gear box with the manual override feature. I have attached a photo for you on how to use the manual override feature. I don't have any replacement instructions on the motor/gear box as the manufacturer does not provide any but it should be pretty straight forward once you have it in front of you.

expert reply by: Conner L