Hydraulic Brake Assembly Recommendation for Trailer with 10 inch Diameter Drums
Published 08/16/2019
Products Featured in This Question
Question:
I have included 2 photos of my brake parts. Will Hydraulic Trailer Brake - Uni-Servo - 10 - Left Hand and Right Hand - 3,500 lbs Fit my boat trailer??? I would need a right and left assembly. Thank you for your time,
asked by: Rick
Helpful Expert Reply:
Yes, the hydraulic brake assembly part # AKUBRK-35L is the correct assembly you need for the left side of the trailer. For a set that includes both sides of the axle what you need is the part # AKUBRK-35. These assemblies are for the standard 10 inch brake assemblies that are found on 3,500 lb axles.
Product Page this Question was Asked From
Hydraulic Trailer Brake - Uni-Servo - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Free Backing
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: Review of the Hydraulic Trailer Brake Kit
- Q&A: Mounting Bolt Spacing and Center Hole Size for etrailer 10 Inch Hydraulic Trailer Brake Assembly
- Q&A: Replacement Hydraulic Drum Brakes for Trailer with 10-Inch Hub/Drums
- Search Results: axle grease caps
- Q&A: Replacement Brake Shoe Lining for 10" Hydraulic Trailer Brakes
- Q&A: Mounting Flange Bolt Pattern of Etrailer.com Hydraulic Trailer Brake Kit AKUBRK-35
- Q&A: Replacement Brake Shoes for Roadmaster Tow Dolly
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Hydraulic Trailer Brake - Uni-Servo - 10" - Left Hand - 3,500 lbs
- Shop: Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Right Hand - 3,500 lbs
- Q&A: Solution for Banging During Starts and Stops with Titan Model 6 Actuator on Trailer
- Q&A: Parts Needed to Add Brakes to 2002 Pace American Cargo Sport
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)