No Power to 7-Way on 2018 Ram 2500
Updated 08/15/2019 | Published 08/14/2019
Products Featured in This Question
Question:
No juice to trailer plug in
asked by: Kevin S
0
Expert Reply:
If you are not getting power to the 12 volt pin on the 7-way on your 2018 Ram 2500, the most likely issue is that you have a blown fuse. I took a look at the online version of the owner's manual and it looks like it is in the F30 cavity in the power distribution center of your truck. You will want to check your version of the owner's manual to verify.
What a lot of people do in order to circumvent this issue is simply run their own wire to their 7-way with 10 gauge wire # 10-1-1 through Circuit Breaker # 9510 to the positive post of your Ram's battery.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: No Power To 12V Auxiliary Power On Factory 7 Way Connector 2018 Ram 1500/2500/3500
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed to Add Brakes to a 3.5K Single Axle Trailer
- Q&A: Replacement Hubs and Brakes for Axle Tecknology BD2-655 Drums
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Q&A: Can a DC to DC Charger Be Mounted in a Trailer's Battery Box to Keep the Trailer Battery Charged?
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: Parts List to Re-Wire a Trailer w/ Electric Brakes