Does Camco RV Power Defender Circuit Analyzer Reset Itself After a Surge

Question

Question:

Is this a one and done surge protector or will it reset if power gets in a useable range again?

asked by: Lou

0

Expert Reply:

Camco does make a version of the Camco RV Power Defender Circuit Analyzer Dogbone # CAM55312 that does automatically reset itself with the Voltage Protector part # CAM55301 but the part # CAM55312 will only take one surge before it needs to be replaced. It's like a fuse whereas the Protector is like a breaker in that it resets.

I attached a review video for the Protector for you to check out as well.

expert reply by: Jameson C

0

John B.

7/20/2020

I have 2 30A circuit analyzer with surge protection. One, the blue surge light is not lit. There other, once of the yellow circuit lights is not as bright as the other. Do i get a 3rd one? A separate surge protector? Help

Chris R.

7/24/2020

If the blue light is no longer illuminating it means the unit has actually experienced a surge episode (and protected your camper). You'll want to replace the unit for which I recommend the Camco # CAM55301. You may want to inspect the wiring of your camper along with where you plug in too just to be sure there isn't any damage that would have caused that surge that needs to be repaired.

Answer 1

I spoke with Valterra and they don't have that exact measurement, but they did tell me that the SurgeMinder Surge Protector and Circuit Tester #SU39SR has an internal clearance of 3.2", so that rain cover has to be at least 3" long.

view full answer...

Answer 2

If the height of the I-beams is less than 6" as you say then you would have to have to swap out the regular safety struts for the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR, which include spacers to place the brackets…

view full answer...

Answer 3

Hey Nathan, welcome back! The etrailer Invisible Base Plate Kit item #e98950 is exactly what you need for your 2021 Jeep Grand Cherokee so long as yours isn't a SRT-8 or one of the Trackhawk models. For a compatible tow bar, I recommend the…

view full answer...

Answer 4

Thanks for the pictures! The Replacement Converter for your Magnetek Converter Series 6300 Model 6332 is going to be the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 35 Amp item #PD4635V.

view full answer...

Answer 5

Hello Tim, Are you asking if you can back up with just the head installed on the Weigh Safe True Tow Weight Distribution Hitch #WS79VR, when you put the trailer coupler onto the ball? If so, then yes because at that point it is really just a ball…

view full answer...

Answer 6

Hello George, In order to get a 7 way on the back of your 2024 Subaru Crosstrek Wilderness, you will need to start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118467. The #118467 will get the 4 flat on the back, but then…

view full answer...

Answer 7

If your camper is wired for 30 amps I highly recommend using a 30 amp surge protector. The potential issue with using a higher-rated 50 amp surge protector is that it wouldn't be triggered soon enough to protect any appliances you have that are…

view full answer...

Answer 8

The Atwood air filter 15084 has been discontinued from the manufacturer. You may be able to still find some but you will likely need to create a new filter using some filter fabric. These types of fabrics can often be found at a hardware store and…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Does Camco RV Power Defender Circuit Analyzer Reset Itself After a Surge

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching