What Torque Should Lug Nuts of Winnebago RL2500 be Tightened to
Published 08/09/2019
Products Featured in This Question
Question:
what should lugs of winnebago rl2500 be tightened to.
asked by: Russell
0
Expert Reply:
Looks like your Winnebago RL2500 has 14 inch wheels that are steel which would mean you'd want to tighten the lugs to 75-85 ft lbs with a torque wrench like part # PTW3001C.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range C
- 4.80/4.00-8
- 8 Inch
- Kenda
more information >
Continue Researching
- Q&A: Recommened Trailer Tires/Wheels to Replace a 4.8-8 Tire W/ 5 Lugs
- Q&A: Compatible 4.80 X 8 Trailer Tire That Can Handle Highway Speeds
- Q&A: Length of Parking Brake Kit Cable
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Best Weight Distribution System For A 2014 V-Cross Vibe Limited Series M-6504
- Q&A: Is it a Good Idea to Upgrade from 8 inch Trailer Wheel and Tire to 12 inch Wheel and Tire
- Q&A: What is Speed Rating of Trailer Tires in Size 4.80-8
- Article: Trailer Lighting Requirements
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Tire Sizing
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Glacier Chains
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)