Should Trailer Hub Grease Seal Be Greased
Updated 07/23/2019 | Published 07/22/2019 >
Question:
I’m installing new seals and bearings and I’m wondering if I need to put a small amount of grease on the rubber inside the lip seal that runs on the spindle. Or should it run dry.
asked by: Bob M
1
Helpful Expert Reply:
It's not standard practice to put grease on the spindle where the lip of the seal rides so it's not a requirement. It wouldn't hurt to do so though so if you are inclined feel free.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- EZ Lube Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- 3500 lbs Axle
- 4200 lbs Axle
- 4400 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: disc brake conversion kit
- Video: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles Review
- Q&A: How to Determine Bearings For Coleman Trailer
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Search Results: trailer bearings races seals caps
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: Replacement Mounting Bracket for DeeMaxx Disc Brake Caliper - Maxx Coating - 3.5K
- Q&A: Fit And Compatibility Of The Kodiak 10" Rotor With The UFP DB35 Brakes
- Q&A: Recommended Disc Brakes for 3,500 lb Axles
- Q&A: Dacromet Kodiak Disc Brake Kit Recommendation to Replace UFP DB35 Kit On Trailer
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Differences Between Combined Hub & Rotor and Separate Hub & Rotor Brakes
- Q&A: I Currently Have Kodiak 13 Inch Brakes On My Trailer, Can I Replace Them With DeeMaxx?
- Shop: Stake Pocket Tie-Down Anchors - Black Powder Coat - 2-3/4" D-Ring - 4,000 lbs - Qty 2
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Camco FasTen RV Leveling Blocks w/ Carrying Handle - 17" x 8-1/2" - Gray - Qty 10
- Search Results: replacement spindle washer
- Search Results: spindle nut washers
- Search Results: 34823 seal
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 2-15/16" - Qty 1
- Shop: Grease Seal - Double Lip - I.D. 1.249" / O.D. 1.983" - 2,000-lb to 2,200-lb Axles - Qty 1
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Video: Install: etrailer Electric Trailer Brakes on a 2019 Grand Design Reflection 150 Fifth Wheel
- Search Results: timken l44649
- Video: Detailed Breakdown of the Double Lip Grease Seal
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearing Kit 1-1/16 Inch BTR Spindle - DX59UR
- Video: Checking Out the Timken Grease Seal
- Search Results: grease seal 125 id

