Lock Recommendation to Convert Hitch Pin of Yakima Bike Rack to Locking

Question

Question:

I actually have a Yakima bike rack but think this will work if the threads are correct.

asked by: April W

0

Expert Reply:

All you need to convert the threaded hitch pin of your Yakima bike rack to a locking hitch pin is the HitchLock part # Y07235 actually. This snaps onto the end of your hitch pin and its locked.

We can't recommend using a different brand of hitch lock with your Yakima rack.

expert reply by: Jameson C

0

Answer 1

Since we don't carry Allen bike racks, we don't offer a brand-specific lock that would work. Typically, the bike rack manufacturers use threaded hitch pins that have a proprietary thread pitch, so you're forced to purchase their hitch…

view full answer...

Answer 2

While we don't carry replacement parts directly from Bell I will give you some options that are similar in sizing. The Fat Tire Straps for Yakima Hitch-Mounted Bike Racks - Qty 2 part #Y02470 is 16" long and 1" wide it offers a hole…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hey Doug, I checked with Curt and their hitch part #C58VV is a confirmed for all models of the 2026 Lexus RZ350e including the electric model so it would work great for you. Do you have a bike rack already? What kind of bikes do you have?

view full answer...

Answer 8

The Hollywood Racks Trail Rider 2-Bike Rack #HR200 weighs about 35 lbs. The Swagman XC 2-Bike Rack #S64650 is lighter at about 26 lbs. The biggest difference between the two is the Swagman rack is rated for 2 bikes at 35 lbs each and the Hollywood…

view full answer...

Answer 9

The Swagman XTC4 4-Bike Rack #S64665 and Hollywood Racks Destination 4-Bike Rack #HR4000 are two of the best values in regards to 4-bike racks, and when taking everything into consideration I highly recommend the Destination #HR4000. There are a…

view full answer...

Answer 10

Hey Gregory, thanks for reaching out. Yes the Curt #C13195 hitch is exactly what you'll need for carrying a few bikes on the back of your 2020 Hyundai Santa Fe. it has a 2" receiver and 750 lb tongue weight capacity so 4 bikes will not be a…

view full answer...

Answer 11

Hey Chris! The Hollywood Racks CrossTrack Bike Rack part #HLY98RR already comes with a hitch lock so no need to get one separately! There is also an integrated cable lock to wrap around your bikes as well. The CrossTrack is expandable so that you can…

view full answer...

Answer 12

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Lock Recommendation to Convert Hitch Pin of Yakima Bike Rack to Locking

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching