Parts Needed To Flat-Tow a 2019 Chevrolet Spark LS With Manual Transmission
Updated 06/22/2019 | Published 06/21/2019 >
Products Featured in This Question
Question:
I will be towing a manual Spark with a Winnebago class A 28foot Sunstar. Can you recommend a complete Towbar/Electrical/Braking package for me.
asked by: Lonnie B
Expert Reply:
In order to flat-tow a 2019 Chevrolet Spark LS (Manual Transmission) with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low adapter. There may also be a few other smaller components that are needed depending on options the vehicle is equipped with.
For a tow bar, I recommend the Roadmaster Nighthawk All Terrain Tow Bar part # RM-676. The Nighthawk is one of the best tow bars we offer. It has a non-binding and self-aligning design which makes for an extremely easy hookup. It also comes with safety cables and a wiring extension. This towbar is then compatible with the Roadmaster Direct-Connect Base Plate Kit part # RM-523202-5.
Then for a tail light wiring harness I recommend the Roadmaster Tail Light Wiring Kit with Bulbs part # RM-155 because it does not require any splicing. In order to then make the harness compatible with the wiring extension on the Nighthawk tow bar you will need to cut off the 4-way and wire the 6-way connector which comes with the tow bar. The other end of the umbilical cord is a 7-way that plugs into your motorhome.
For a supplemental braking system, I recommend the SMI Stay-IN-Play DUO Supplemental Braking System part # SM99251. I like this system because it is a one time setup and everything will be hidden once installed. In order for this system to operate properly in your vehicle you will also need to use the Roadmaster Stop Light Switch Kit part # RM-751480.
To summarize, I recommend using the following parts:
Roadmaster Nighthawk All Terrain Tow Bar part # RM-676
Roadmaster Direct-Connect Base Plate Kit part # RM-523197-5
Roadmaster Tail Light Wiring Kit with Bulbs part # RM-155
SMI Stay-IN-Play DUO Supplemental Braking System part # SM99251
Roadmaster Stop Light Switch Kit part # RM-751480
Product Page this Question was Asked From
Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights - Non-Binding - RV Mount - 8,000 lbs
- Tow Bar
- Hitch Mount
- Telescoping - Non-Binding
- Aluminum
- 8000 lbs
- Fits Roadmaster Base Plates
- Stores on RV
- Cables Included
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: How to Measure for Trailer Hitch Drop
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Q&A: Recommended Parts for Flat Towing a 2025 Ford Maverick
- Article: Must-Have Flat Towing Components
- Article: How to Choose a High-Low Adapter
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Flat Towing Set Up for a 2026 Ford Maverick Hybrid
- Q&A: Recommended Complete Flat Towing Setup for a 2024 Jeep Wrangler
- Q&A: Recommended Flat Tow Parts for a 2025 Jeep Wrangler Sport Towed By A Tiffin RV w/ Quick Connect Air
- Q&A: Best Flat Tow Setup For 2026 Ford Maverick XLT Hybrid
- Q&A: Parts Needed to Flat Tow 2024 Ford Maverick Hybrid




