Correct Rebuild Kit for Roadmaster Sterling Tow Bar

Question

Question:

Rebuilding my Sterling Roadmaster tow bar. The SN of my tow bar is 012088. Will the rebuild kits 910003-30 and 40 fit my tow bar?

asked by: Ned H

0

Expert Reply:

Yes, the Complete Repair Kit for Roadmaster Sterling Tow Bar # RM-910003-30 will work for your Roadmaster Sterling Tow bar; the Inner Arm Bushing Kit for Roadmaster Sterling Tow Bars # RM-910003-40 will also work for you, so long as your bar isn't an "All-Terrain" model.

expert reply by: Kyle S

0

Answer 1

Yes, the Inner Arm Bushing Kit part #RM-910003-40 that you referenced is going to fit the Roadmaster Sterling Tow Bar you have with the serial number 007518.

view full answer...

Answer 2

The number you mentioned is not a serial number, though if you had the newer Sterling All-Terrain, the decal would say "All-Terrain" right under the Sterling, so if that's not there I'm pretty confident you have the older Sterling…

view full answer...

Answer 3

Yes, repair kit #RM-910003-30 will work with the original Sterling and well as Sterling All-Terrain tow bars.

view full answer...

Answer 4

It sounds like you are referring to the inner arm bushings that come with the kit part #RM-910003-40. This kit is a fit for your Sterling and comes with the seals you referenced.

view full answer...

Answer 5

I've attached a link that takes you to all of the repair parts we have for the Roadmaster Sterling, including the repair kit #RM-910003-30. The Sterling All-Terrain, part #RM-576, isn't that much different than the original. It functions in…

view full answer...

Answer 6

If you can provide me with exactly what tow bar you have I may have better information for you but I had saw you were looking at parts for the older Roadmaster Sterling Tow Bar so I will assume that is what you have. In order to free the arms…

view full answer...

Answer 7

We do offer the Replacement Black Plug #RM200460-00 that fits your Roadmaster Sterling Tow Bar #RM-576. This plug is sold individually and fits into the torsion spring housing.

view full answer...

Answer 8

Yes, the Inner Arm Bushing Kit for Roadmaster Sterling Tow Bars #RM-910003-40 will work with your Sterling tow bar. The Inner Arm Bushing Kit for Roadmaster Sterling Tow Bars #RM-910003-40 works on models with a serial number lower than 27671 which…

view full answer...

Answer 9

Yes, the Roadmaster Sterling Tow Bar Bushing Kit part #RM-910003-40 that you referenced does fit your Sterling with the serial number 006914. I checked with my contact at Roadmaster to confirm this.

view full answer...

Answer 10

The Complete Repair Kit for Roadmaster Sterling Tow Bar #RM-910003-30 contains (4) Rubber caps (2) Locking springs (2) Retaining rings (2) Shoulder bolts (2) Nylock nuts (14) 1-1/2" Diameter acetyl washers (1) 3/4" Jam nut (4) 3/4"…

view full answer...

Answer 11

I spoke with my contact at Roadmaster about how to find the serial number to get the proper adapter to use with the Blue Ox base plates. You will need to spread the 2 arms apart on the tow bar and then look for the sticker where the two arms come…

view full answer...

Answer 12

The Roadmaster Sterling All Terrain Tow Bar part #RM-576 is just simply the newer, updated model of the discontinued Roadmaster Sterling Tow Bar part RM-555. It sounds like you might be looking for replacement parts for one or the other so if that is…

view full answer...

Correct Rebuild Kit for Roadmaster Sterling Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching