Recommended Trailer Hubs with 4 on 4 Inch Bolt Pattern for CE Smith Trailer Axle Beam CE33201GA
Updated 06/18/2019 | Published 06/17/2019
Products Featured in This Question
Question:
I have a boat trailer that needs a new axle. Which hubs 4 on 4 would you recommend with this configuration? Would AKIHUB-440-2-G-2K work? My current axle measures 57 1/2inch hub face to face. Spring centers are 47. What type of spindles are on this 1800lb axle? Thanks
asked by: Russ
Expert Reply:
The correct trailer hub with 4 on 4" bolt pattern to use with the CE Smith Trailer Axle Beam part # CE33201GA is the Trailer Idler Hub Assembly part # AKIHUB-440-2-G-EZ-2K. The spring seats can then be moved in 1/4" on each side to match your 47" spring center spacing.
The Trailer Idler Hub Assembly part # AKIHUB-440-2-G-2K will work but you would want to use the above E-Z Lube option instead as that is what the axle has.
Product Page this Question was Asked From
CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Marine Grade
- No Hubs
- 1800 lbs
- Spindles Only
- 46-1/2 Inch Spring Center
- 57-1/2 Inch Hub Face
- No Drop or Lift
- CE Smith
more information >
Continue Researching
- Q&A: Replacement 1-1/2 Inch Square Axle for a Boat Trailer
- Q&A: Replacement Axle for Trailer with 46-1/2 Inch Spring Center
- Q&A: Replacement Hubs and Bearings for Harbor Freight Trailer
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Replacement Axle for a 1990 EZ Loader Boat Trailer
- Q&A: Estimated Weight rating for 1-1/2-Inch Square Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Trailer Lighting Requirements
- Article: Best Boat Trailer Jacks
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Trailer Wiring Diagrams