Will Curt Replacement Spring Bar Fit Older CP Weight Distribution System
Updated 06/18/2019 | Published 06/16/2019 >
Products Featured in This Question
Question:
Hello: I am wondering whether a C17073 will fit an older CP equalizer hitch with a 1.5 inch diameter bar and a chain connector? Somebody stole my original set. The sway control with the original hitch was a CP 34715 RH. Best,
asked by: Richard P
Expert Reply:
Since weight distribution (WD) systems use spring bars that are tailored to their specific products I would be very surprised if the Replacement Spring Bar for Curt MV Weight Distribution System # C17073 is compatible. Even if the diameter is the same, the way the bar connects to the head of the WD unit is almost always different.
I tried looking up "CP Weight Distribution" on the internet but the only thing I was able to find is that this must be a company that went out of business years ago because only a few people had heard of them. If this is the case then I highly recommend upgrading to a newer system so that replacement parts are more easily accessible in the future.
If your current system is rated for 1,000 lbs tongue weight (TW) then I recommend using the Curt TruTrack # C17500 because it has the same TW rating and it uses trunnion bars which have integrated sway control and allow you to backup your trailer without disengaging the friction sway control like you have to do with the Husky system you currently use. If you'd rather stick with the spring bars that use the chains then the Curt MV # C17052 is an excellent choice. We even have it available with a friction sway control as part # C17062 if you need to upgrade that as well.
Attached are some review videos that you can check out.
Product Page this Question was Asked From
Replacement Spring Bar for Curt MV Weight Distribution System - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1000 lbs TW
- Round Bar
- MV
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Do You Have an Updated Diagram for the BulletProof Hitches Weight Distribution Shank BPH75RR?
- Q&A: How Far Apart are Hitch Pin Holes of Bulletproof Weight Distribution Shank BPH75RR
- Q&A: Can I Upgrade My E2 Roundbar System With Higher Rated Bars
- Q&A: Replacement Inner Tube Gooseneck Coupler 4" Diameter For BullDog Bx1 25k
- Q&A: Will 1,000 lb Spring Bars Work on Fastway e2 Weight Distribution With 800 lb Bars
- Q&A: Comparing Timbrens and Air Bags for a 2020 Ford F-150
- Q&A: Seal With Dimensions to Replace 171255UC
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Replace an RV Roof Vent Cover
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)




