Replacement Lock for Sears SportRack SV-20 Cargo Box

Question

Question:

How do you replace a Sears sv-20 lock since they do not make that lock?

asked by: Mike D

0

Expert Reply:

In order to replace the lock on your Sears SportRack SV-20 Cargo Box you can use the Replacement Lock Core and Key for SportRack Cargo Box part # SR03807. As you mentioned, there is not an exact replacement lock for this cargo box but the above will work for you as it has worked for several others with the exact same box (see review). In order to install this lock assembly all you will need to do is remove the nut from the back, slide the lock out, and then install the new one with the included nut.

expert reply by: Conner L

0

click to enlarge

Answer 1

If you can locate the key number on your existing locks (see photo), we might be able to obtain replacement keys. If the key number shown on your lock begins with the letter N, you can type THKEYNxxxx (with the x's representing the actual key…

view full answer...

Answer 2

Since you are needing a replacement lock as well as the key, you can use the Replacement Lock Core and Key #SR03807 for your Sears X-Cargo Sport 20 cargo box.

view full answer...

Answer 3

Thanks for reaching out, David! The hardware you need to mount the Sears X-Cargo roof box on your 2019 Kia Sorento is the Hardware Kit #TH05603. I'm not sure what the crossbar spread range is for the X-Cargo box so you might need to drill new…

view full answer...

Answer 4

For your Pep Boys Voyager XL Cargo Box, you can use the: -Replacement Lock Core and Key for SportRack Explorer Cargo Box #SR03807 for a replacement lock core and key, and the Replacement Lock Locator for SportRack Skyline XL Cargo Boxes #TH03808 for…

view full answer...

Answer 5

We have replacement keys for your Sears X Cargo 20 series cargo carrier. In order to get the correct one you will need to know the key number of your current setup. If you do not have a key to get the part number off of, the lock on the cargo box…

view full answer...

Answer 6

The replacement key you need is part #THKEYN020. You would need to order a quantity of 2 of these keys.

view full answer...

Answer 7

Yes, for a replacement key for your Sears Sport 20-SV carrier you would want the Replacement Key part #THKEYN2826.

view full answer...

Answer 8

In order to retrofit the Replacement Lock Core and Key part #SR03807 and Replacement Lock Locator part #TH03808 to the top lid on your cargo box you would need to drill out the two rivets for the old lock and then drill a new 5/8" hole for the…

view full answer...

Answer 9

Since you mention you do not have the hook type lock like #SR03807 then this is likely to be the part you need. According to my contact at Thule, who made the SV cargo boxes for Sears, the complete replacement lock assembly like yours is not…

view full answer...

Answer 10

The correct replacement key for your Sears Sport 20-SV Cargo Box is the Replacement Key for Thule and Sportrack Racks and Carriers part #THKEYN020.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement Lock for Sears SportRack SV-20 Cargo Box

Product Page this Question was Asked From

Continue Researching