Replacement Hubs that Can Fit 2,000 lb Axle with 5 Lug Bolt Pattern

Updated 06/10/2019 | Published 06/09/2019

Products Featured in This Question

Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased

(1111)

$48.23

Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased

(1528)

$48.59

Question:

Will this assembly work on 2000 lb Aluma motorcycle trailer with 13 in wheels and torsion axles? 5 over 4 1/2 with no brakes

asked by: Patrick C

Expert Reply:

The Trailer Idler Hub Assembly # AKIHUB-545-2-LFEZ-1K that you referenced is designed to fit the industry standard 2,000 lb capacity trailer axles with a 5 on 4-1/2 inch bolt pattern like you have so most likely this will fit but you still should probably check. Take the hub off of your current axle and measure the diameter of the spindle where the bearings ride. If this dimension is 1 inch then this is the correct fit.

If for some reason you get a different dimension let me know and I'll see what we might have that could work. The other most likely scenario is that you'd need the part # AKIHUB-545-2-1K which fits spindle diameter of 1.06 inch instead.

expert reply by: Jameson C