Will Higher Rated Equal-i-zer Weight Distribution Spring Bars Increase Capacity Without Head Unit
Question:
I have a new Equal-i-zer hitch that is 1,000 TW rated and I may need to up-grade to 1,200 or even 1,400 tw rated spring bars. My question is : can I upgrade to the stronger rated bars without replacing the head? are they the same size as my 1,000 lb tw bars?
asked by: Ken J
0
Expert Reply:
If you have the Equal-i-zer Weight Distribution System - 10,000 lbs GTW, 1,000 lbs TW # EQ37100ET you do need to add both the spring bars and head unit in order to increase the capacity of your system.
So to upgrade to 1,200 lbs you would need to add both the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,200 lbs TW # EQ90-01-1299 and Replacement Head for Equal-i-zer Weight Distribution Systems - 1,200 lbs TW # EQ90-02-1200.
To upgrade to a 1,400 system you would need the Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,400 lbs TW # EQ90-01-1499 and Replacement Head for Equal-i-zer Weight Distribution Systems - 1,400 lbs TW # EQ90-02-1400.
expert reply by: Kyle S
0
Products Referenced in This Question
Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,200 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1200 lbs TW
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1400 lbs TW
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Replacement Head for Equal-i-zer Weight Distribution Systems - 1,200 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Replacement Head for Equal-i-zer Weight Distribution Systems - 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Prevents Sway
- 4-Point
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- 2020 F-150 & Equal-i-zer Weight Distribution System w/ 4-Point Sway Control
- Weight Distribution & Trailer Brake Controller For Towing 2021 GD XLS 22RBE w/2002 Silverado 1500
- Correct Equal-i-zer Weight Distribution System for Forest River Rockwood Ultra Lite 2614BS
- Ways To Reduce Noise From Equal-i-zer Weight Distribution Hitch System
- Recommended Solution to Fix Sag on 2018 Nissan Armada SE Towing Trailer with Weight Distribution
- Recommended Weight Distribution System for a 10,000 lbs Travel Trailer
- Best Suspension Enhancement For a 2018 Toyota Tundra When Towing a 2021 Lance Travel Trailer
- Can 1,000 lb Tongue Weight Rated Equal-I-Zer be Upgraded to 1,600 lb
- Recommendations For Reducing Rear Suspension Sag on a 2016 Ford Expedition Towing a Travel Trailer
- Replacement Snap-Up Lever For Equal-i-zer Weight Distribution Hitch
- Weight Distribution Hitch With Sway for a 2021 Jayco Jay Flight SLX 267BHS Travel Trailer
- Recommended Weight Distribution Hitch System For 6,000LB Trailer Which Requires Little Strength
- Can a Truck Scale Be Used When Setting Up a Weight Distribution Hitch?
- Can You Raise L-Brackets on Equal-i-zer Weight Distribution More Than Level with Frame
- Recommended Weight Distribution Hitch For a 2020 Gulf Stream Kingsport 248BH Travel Trailer
- Missing Rivet From Equal-i-zer Weight Distribution System
- Recommended Equal-i-zer System for Boat Trailer with 800 lb Tongue Weight
- Where are the 4 Points of Sway Control in Equalizer Weight Distribution Systems
- Will a Weight Distribution System Fix Sway that Occurs at 50 MPH
- Can Weight Distribution Hitch Be Installed On Trailer With 30 Degree A-Frame
- Recommended 2-Inch Hitch Ball for Equal-i-zer Weight Distribution System
- Need Shank Like What Is Included With Equal-i-zer Weight Distribution Systems
- Can Equal-i-zer Weight Distribution be Used on Boat Trailer with Pole Tongue
- How to Determine Weight Distribution System for Trailer
- Equal-i-zer Weight Distribution Recommendation for Rockwood Mini Lite 2512
- Does Equalizer Weight Distribution System EQ37100ET Come with 2-5/16 inch Hitch Ball
- Can the Curt TruTrack or Equal-i-zer Systems Be Installed On a V-Nose Enclosed Trailer
- Best Weight Distribution System for a Loaded Trailer Weight of 6,500 lbs