Choosing a Replacement Axle for a 1995 Dutchman 1204 Pop Up Camper  

To determine hub face to hub face dimensions on your trailer axle you'll want to put the trailer on jack stands so that you can take the wheels off and then measure from one hub face to the other hub face.

To determine the axle size you will need there are some measurements needed. First, if you are replacing the axle then you can measure the one you have. Measure from the center of one spring seat to the center of the other spring seat. Then measure…

20 year old leaf springs on a trailer could easily stretch 3/4 of an inch. Going with a 25-1/4 inch spring like you mentioned would be great. Since your springs are 3 inch in diameter that would indicate that most likely you have a 5,200 lb axle as…

Trailer leaf springs can grow longer after many years of use. A new springs that measures 25-1/4-inches long like #e57SR could easily measure 25-1/2-inches after years in service on a trailer. Springs can lengthen as much as 3/4 of an inch. If your…

I recommend staying with the 4-Leaf Double-Eye Spring for 3,500-lb #e54SR. This will ensure that you do not have to change other parts of your suspension system and the trailer has the correct ride quality. The 4-Leaf Double-Eye Spring for 4,000-lb…

You will need to identify your bearings to find the right replacement hubs for your 1995 Ditchmen 1003. If you have #L44643 inner and outer bearings you can use the #AKIHUB-440-2-G-1K you were looking at. If you have #L44649 bearings you will need…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…