How to Pick Out Bearing Buddy to fit Trailer Hub
Updated 05/02/2019 | Published 05/01/2019
Products Featured in This Question
Question:
My bearing housing measures 2 1/2” will these covers fit
asked by: Chuck
0
Expert Reply:
The way to pick out Bearing Buddies for a trailer hub is based on the diameter of the bore of the hub where the grease cap fits. If you have 2-1/2 inches you most likely would need the # BB2562 which fits a hub bore of 2.562 inches or the # BB2441 which fits a hub bore of 2.441 inches. Since the measurement needs to be exact you'll want to use a caliper like the # PTW80157.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2562 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.56 Inch
- 5000 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Q&A: What Bearing Buddy Is Closest to Correct Size for Hub Bore Diameter of 2.3125 inches
- Q&A: Dust Cap Option For A Hub Bore Of 2.325 Inches
- Q&A: Bearing Replacements for Dexter 5,000 lb Trailer Axle
- Q&A: Exterior RV Ladder Recommendation for 2003 Coachman Shasta
- Q&A: Bearing Buddy to Fit 2.5 inch Hub Bore of Lippert 5,200 lb Axle
- Q&A: Need To Replace Titan 225 Caliper From Titan 4843100 Disc Brake Kit
- Q&A: Bearing Buddy Recommendation for Hub Bore with 2.5 inches
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)