Are Fastway and Equal-i-zer Weight Distribution L-Brackets the Same

Question

Question:

Is the L bracket the same for an e2 system as an equal-i-zer system?

asked by: Roger N

0

Expert Reply:

The Fastway and Equal-i-zer weight distribution system L-brackets are very similar and are both made by same company but they are slightly different. I attached pictures of the two designs for you to see the differences. The picture on the left is Equal-i-zer and the picture on the right is Fastway.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Per the manufacturer The Fastway square trunnion L Brackets #FA93-02-5150 and The Equalizer L Brackets #EQ90-02-5150 are made by the same manufacturer and they're the same. I have attach a review video below.

view full answer...

Answer 2

Typically parts from different manufacturers will not be cross compatible, but if you were replacing the whole frame bracket, it really shouldn't be an issue. However, we do also carry a replacement that may be a better option. The Replacement…

view full answer...

Answer 3

You are correct. You will only need the 14,000LB 2-5/16" Hitch Ball #EQ91-00-6140, Head #EQ90-02-1400 and Spring Bars #EQ90-01-1499 to convert your 10,000LB Hitch #EQ37100ET to a 14,000LB Hitch #EQ37140ET. The Sway Brackets #EQ95-01-5600 are…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Lawrence, thanks for the information. For your 7,500 lbs trailer, I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item #EQ37100ET. This system works with tongue weights between 600 lbs - 1,000 lbs so it's going…

view full answer...

Answer 6

Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…

view full answer...

Answer 7

Hey Mike, thanks for the information! The best weight distribution system for your 7,000 lbs Big Tex 70DM car hauler is going to be the Equal-i-zer item #EQ37100ET. This system works with tongue weights between 600 lbs - 1,000 lbs. That's going…

view full answer...

Answer 8

Hey Mark, welcome back! This is very much a case of "you get what you pay for." The Curt TruTrack 2P #C95MJ you looked at is a good option if you tow your trailer a short distance once or twice a year. If you tow with any frequency and you…

view full answer...

Answer 9

Hey Matthew. No one makes a custom fit gooseneck hitch for a Silverado 5500 but we do have a couple of options depending on how your truck is setup. If you have a flatbed truck or one with a regular bed, you can use the B&W Turnoverball Underbed…

view full answer...

Answer 10

Hey Junior, the Weigh Safe weight distribution system part #WS94RR that you referenced is the correct kit for your 2020 GMC Sierra 1500 and the weight of your car hauler. This will be a great addition to your towing setup! Then for a Roadactive kit…

view full answer...

Answer 11

Hey Ira, to use an Equal-i-zer system with a 8 inch tall frame what you'd need is the part #EQ84FR which replaces the inner and outer link plates for the spring bar hanger with ones that can fit an 8 inch tall frame.

view full answer...

Are Fastway and Equal-i-zer Weight Distribution L-Brackets the Same

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching