Cargo Carrier For Winnebago Trend 23D with 1-1/4 Inch Hitch Receiver

Updated 04/11/2019 | Published 04/10/2019

Question:

I have a 2017 Winnebago Trend 23D on a Dodge Promaster chassis with a 1 1/4 inch receiver. Please advise which carrier I should order. It must fold up to fit in the RV garage.

asked by: John M

Expert Reply:

We do carry cargo carriers that you can use in the 1-1/4 inch receiver on the back of the Winnebago. All of the folding options fit a 2 inch hitch receiver.

I recommend the Curt cargo carrier part # C18110 for the back of your Winnebago. If the hitch on the motorhome is recessed the shank on the Curt carrier is 11-1/8 inches long so it gives you the clearance you need to pin it into the hitch without touching the back bumper of the motorhome. The cargo carrier can handle up to 300 lbs and measures 47-11/16 inches long x 19-1/2 inches wide x 2-9/16 inches deep of useable space. It is a good idea to check the tongue weight capacity of the hitch on the Winnebago to make sure you do not exceed that.

expert reply by: Heather A