Is Wear on Connectors of Camco RV Power Defender Voltage Protector a Concern
Updated 04/01/2019 | Published 03/29/2019
Question:
my surge protectir has a slight burn or melt on the female side should i be concerned
asked by: Mary J
Helpful Expert Reply:
As long as the Camco RV Power Defender Voltage Protector # CAM55306 is still functioning properly and the lights on the front panel are showing that you are safe you will be fine. Most likely you had a pretty big power surge that this was able to protect you from! Definitely keep an eye on it and if you see any changes you'd probably want to have an electrician take a look at your RV's setup to make sure you don't have any wiring issues that need to be cleaned up.
Product Page this Question was Asked From
Camco RV Power Defender Voltage Protector - 50 Amp
- RV Surge Protector
- Surge Protector
- 50 Amp
- Portable
- Camco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: High Low Adapter For Dirt Bike Carrier
- Q&A: Looking For High-Low Adapter For 2-1/2" Hitch With 12" Drop
- Q&A: Is Lube Plate Needed When Using Pivoting Pin Box Like MorRyde Orbital Pin Box
- Q&A: Why Does the Lube Plate Fall Off My Trailer
- Q&A: Correct Gen-Y Gooseneck Pin Box for a Brinkley 5th Wheel Trailer
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Q&A: Troubleshooting 5th Wheel Landing Gear That Retracts But Wont Extend
- Q&A: Replacement Follow Leg for a 2006 Alpenlite 31CK 5th Wheel
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: RV Electrical Power Systems
- Article: What are the Common Types of Propane Fittings Used on RVs?