Availability of Axle Flip Kit for Lippert 4,400 Pound Axle

Updated 03/29/2019 | Published 03/27/2019

Question:

Hi, my trailer has 4400 lb lippert axles and i was wondering if there is an axle flip kit that will fit? As near as i can tell the axles are 2.92 inches in diameter. Thanks!

asked by: Matt

Helpful Expert Reply:

For the 4,400 pound Lippert axles on your trailer the Dexter Over-Under Conversion Kit # K71-385-00 should work perfectly. This particular kit is designed for 3 inch round axles (which usually indicate an axle rating of 4,400 to 7,000 pounds) and will allow you to move the leaf springs to the top of the axle.

It's very likely that the 2.92 inch diameter you took is just a manufacturer variance (or just due to the difficulty of climbing under the trailer and taking an accurate measurement). This kit will work just fine for what you have.

I have attached a short video review and the written installation manual that you can also check out.

expert reply by: Chris R