2018 Ford Edge Trailer Brake Controller Recommendation and 7-Way Trailer Connector

Updated 03/15/2019 | Published 03/04/2019

Products Featured in This Question

Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - Up to 3 Axles - Proportional

(1676)

$290.00

Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional

(1769)

$279.95

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3398)

$121.17

Question:

What do I need to install a brake controller on 2018 Ford Edge with factory 4-way

asked by: Freddie

Expert Reply:

To add a brake controller to your factory 4-way, I recommend using the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. This will give you the 7-way connector, the wiring, circuit breakers and tester needed to get the functions you are currently missing.

Then you have the option of either hardwiring a brake controller or using a wireless brake controller. I recommend going with an option that gives you a clean look in your vehicle, so if you want a hardwired controller, I recommend the RedArc Tow Pro Elite # RED44FR which will simply give you a button that looks factory in your dash or console. This is the route I'd go because of the adjustability and ease of use with a simply connection and adjustment available at any time.

If you want a wireless option, I recommend the Curt Echo # C51180 which uses a Bluetooth connection to a mobile app for its settings. This is a super easy to install and remove option that works for trailers with single or tandem axle electric brakes.

I've attached a couple videos to assist.

expert reply by: Jason S