How Does Wiring Attach to 2-Pole Trailer Wiring Connector # 337TC2012

Published 02/20/2019

Question:

Can you get the actual MFG. instructions for connecting the wires to the plug. If you actually take it apart you will find a machined brass part that is too thick to crimp, and has no screw to bind the wire.

asked by: Dave K

Expert Reply:

You'll need to solder the wiring to the pins that are in the 2-Pole Trailer Wiring Connector # 337TC2012. Basically you take off the black front section by removing the set screw and then run the wires through the back of the connector and solder them to the pins and reassemble.

expert reply by: Jameson C