Is It Possible to Just Replace Trailer Axle Spindle if Axle is Still Good
Published 08/17/2018
Question:
I have weld on spindles/ axle stubs that need replacing. My question is can I reuse the axles if they are in good condition?
asked by: Al
Expert Reply:
If your axles are fine you can replace just the spindle and be totally fine. This is a common enough situation which is why we offer just replacement spindles like the part # TRU97FR that you were looking at.
Trailer spindles must be installed by a qualified professional welder. Spindles must be welded on perfectly concentric or you will have tracking problems. A trailer shop will have the right jigs to allow the spindle to be welded on correctly.
Product Page this Question was Asked From
Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- Without Flange
- L44643
- 1-1/2 Inch Diameter
- Square
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Is a Damaged Spindle Safe to Use If Hub Fits It
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Hub Recommendation for 2003 Bearcat Trailer with Dexter Hub 8-258
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Will DeeZee Custom-Fit Truck Bed Mat Fit 2025 Ram 1500 Without Trimming
- Article: Trailer Tire Sizing
- Q&A: Difference Between 205/75-15 Kenda Tires with Black Mod Wheel
- Q&A: Trailer Hub that Fits 1 inch or 1-1/6 inch Diameter Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams