Mounting Hole Dimensions for Ventline Exterior Wall Vent # V2111-13

Updated 07/06/2018 | Published 07/04/2018

Question:

I have a Forest River Roo23ss from 2010 and the exterior cover for my range is broken. I think the Ventline V2111-13 is what I need, but mine has ten screws two rows of five each. I am trying to match up the pattern. Do they made them with the lockable damper with the 10 screw pattern any more?

asked by: Terry L

Expert Reply:

All of our range hood vent covers, such as the Ventline # V2111-13 referenced in your question, use 10 mounting screws but not in 2 rows of 5 like what you are describing. On the Ventline vent, there are 4 holes on both the top and bottom edges, and 1 hole at the center of both the left and right sides.

The mounting holes are spaced apart 3-3/4 inches (on center) horizontally and 2-3/8 inches apart vertically. The vent has an overall width of 11-5/8 inches and a height of 5-5/16 inches. I have attached an image with these dimensions labeled that you can also check out.

I recommend using this information to see if this assembly will be compatible as a replacement on your Forest River RV.

expert reply by: Chris R