Recommended 7-Way Wiring for 2008 Ford F350 4x4 with 5th Wheel and Gooseneck Wiring Adapter
Updated 06/20/2018 | Published 06/19/2018 >
Products Featured in This Question
Question:
I have a 1 ton Truck that has factory tow package. The previous owner was in a rear end accident and the bumper and tailgate were replaced. The 7 oin trailer female is some after market plug that is hardwired to the receiver end for trailer and a factory olug in the gray end that plugs into chassis wiring harness. I bought Curt gooseneck adapter that plugs into the factory wiring and lets you keep the bumper connector and gives you a second receptical to put in the bed for the gooseneck trailer. I am looking for a compatible wiring plug that goes from factory chassis to the bumper plug and will splice into the Curt adapter. You already helped me with my 5th wheel hitch. Thank you so much
asked by: Mike S
Expert Reply:
It sounds like you just need the Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket # PK11898. This will splice into your factory wiring and give you the round connector needed to install your gooseneck adapter. This kit comes with the 7-way and mounting bracket, but also comes with the pigtail and connectors you need to complete your wiring.
This will allow you to easily connect the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long # C56000.
Product Page this Question was Asked From
Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long
- Custom Fit Vehicle Wiring
- 5th Wheel and Gooseneck Wiring
- Vehicle End Connector
- 7 Blade
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Is The MORryde GooseTech Compatible With A Short Bed 2024 Ram 2500?
- Q&A: Curt Base Rails for 2024 Ram 3500
- Article: Ram Trailer Tow Prep Package
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Is Progressive Dynamics 2000 Watt Inverter A Good Replacement For WF-5110R 1000W Inverter?
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Recommended 5th Wheel Hitch and Installation Hardware for a 2024 Toyota Tundra
- Article: Gooseneck to 5th Wheel Adapters
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Trailer Wiring Diagrams




