Replacement for Atwood Landing Gear Motor 75391

Question

Question:

I am looking for a replacement motor for the Atwood 75391. Will the LG-196308 work? Thank you!

asked by: Teri

0

Expert Reply:

To replace the motor on your Atwood landing gear you will want to use Replacement Motor # LG-142178, which is rated for 5,500 lbs.

expert reply by: Kyle S

0

Answer 1

For a replacement lead leg for your Atwood landing gear what you can use is the Replacement Lead Jack with Drop Leg #LG-179013. You just want to measure to make sure it is the right length, as this leg is 29-1/2 inches with a distance between the…

view full answer...

Answer 2

We do offer several brands and models of replacement 5th wheel landing gear motors, including the Atwood 75391 that you referenced. This motor is rated for applications up to 5000-lbs tongue weight. We also offer Stromberg Carlson's #LG-217884…

view full answer...

Answer 3

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

view full answer...

Answer 4

So Atwood stopped making fifth wheel landing gear so the replacement legs are no longer available and also there are no other manufacturers that have a suitable replacement. So what you'd need to do is replace the landing gear altogether like…

view full answer...

Answer 5

Since Atwood is no longer in the landing gear business it is basically impossible (unfortunately) to get just a replacement leg. The part number that you gave me actually is a document that shows the various parts for Atwood landing gear, but nobody…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Replacement for Atwood Landing Gear Motor 75391

Product Page this Question was Asked From

Continue Researching