Truck Bed Rail Height and 5th Wheel Trailer Clearance Compatibility
Updated 06/14/2018 | Published 06/12/2018 >
Products Featured in This Question
Question:
I currently have a 2017 F350 Fx4 with an undercarriage bandW Companion gooseneck to 5th wheel hitch kit installed. I am learning that at 60inch height at the back of the truck, I may not be able to find an RV with suitable clearance. I am thinking of a flatbed. Can this be done with the undercarriage hitch kit and wiring?
asked by: Scott
Expert Reply:
The excellent B&W Companion hitch setup for your 2017 F-350, such as parts # BWRVK3500-5W and # BWGNRK1116-5W which fit the 4WD with 8-foot bed, cannot be moved to a flat bed but there are 5th wheel hitches made for that application. They can entail other issues though, like the bed corners hitting the trailer when you turn sharply.
Many late-model pickups, especially some Fords, have very tall bed rail height, which you know already. Trucks with extra large tires add to the problem of inadequate clearance between the bed rails and the trailer overhang and/or a hitched trailer that is out of level.
When we get this concern from our customers who are looking for a cost-effective solution we suggest installing on the trailer an axle over-under kit (one per axle). We offer two such kits, # K71-384-00 for 2-3/8-inch diameter axles and # K71-385-00 for 3-inch axles.
These provide trailer height gain of the sum of the axle diameter plus the height of the leaf spring stack. So for example, kit # K71-385-00 for 3-inch diameter axles installed on a trailer with a 3-inch tall leaf spring stack will gain a total of 6-inches.
The linked diagram shows the minimum recommended clearances for 5th wheels. These kits often provide enough additional trailer height that these taller pickups are not an issue.
Product Page this Question was Asked From
B&W Companion 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
- 5th Wheel Hitch
- Fixed Fifth Wheel
- Aftermarket Below Bed Rails
- 5000 lbs Vertical Load
- 20000 lbs GTW
- Double Pivot
- Standard - Double Jaw
- 16-1/4 - 18-1/4 Inch Tall
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Parts Needed to Use Andersen Aluminum Ultimate in 2025 Silverado 2500 Without Prep Package
- Q&A: Is The Gen-Y Hitch Nomad Pin Box GY57ND The Same Dimensions As Lippert 1621 Pin Box?
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Is There a Replacement Inner Arm for a Solera Awning V000564552
- Q&A: Why Is a 10" Lube Plate Recommended for a B&W Companion Instead of 12"
- Q&A: Difference Between B&W RVK3500 and RVB3500 Parts
- Q&A: How Many Additional Panels Can Be Added To The Rich Solar RV Solar Charging Kit RS37VR
- Q&A: Will A B&W Companion Allow For Enough Room For An In-Bed Toolbox
- Article: Top Gifts for Dads in 2024
- Article: Ram Trailer Tow Prep Package
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: 4-Step Guide to Installing RV Solar Power
- Article: Fifth Wheel Hitch Combinations for Ram Trucks with RamBox (2009-Current)


