Recommended Trailer Hitch Receiver for 2009 Infinity G37 Sedan

Updated 06/07/2018 | Published 06/06/2018

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(15)

$173.17

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2634)

$16.89

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

(2336)

$35.60

Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs

(9)

$2086.93

Question:

I have a 09 Infiniti G37x 4door sedan, and want to to put a hitch on it to tow a 4x8 trailer with a couple kayaks on it . What are my options I keep seeing class 1 ,2,3 but not sure what is needed for hauling a couple kayaks around on the trailer or even mulch or wood from time to time ,, and help is much appreciated

asked by: Mike H

Expert Reply:

For your 2009 Infinity G37 sedan, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11499. The Class I is all that is available for your vehicle, but will work well to tow a small trailer like you mentioned to tow a couple kayaks or some mulch/wood from time to time.

I recommend using ball mount # 3593 with this hitch and a 2 inch hitch ball like # 19258. If you check your coupler and determine you need a 1-7/8 inch diameter ball, then I recommend using # 19256. For your trailer wiring harness, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118480. This will connect to your factory wiring behind each tail light and pull power directly from your vehicle battery. I've attached an article to assist with routing that wire.

If you don't already have a trailer for that application, I recommend the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs # K2MMT5X7.

expert reply by: Jason S