Replacement 7-Way Trailer Connector with Wiring for a 2007 Sportsman Trailer

Updated 06/01/2018 | Published 05/31/2018

Products Featured in This Question

Deka Ring Terminal - Heat Shrink - 16-14 Gauge - 1/4" Ring ID - Nylon Insulation - Blue - Qty 1

(43)

$2.39

Deka Ring Terminal - Heat Shrink - 12-10 Gauge - 1/4" Ring ID - Yellow - Qty 1

(43)

$2.01

Wiring Kit for Hydrastar Electric Over Hydraulic Actuators

(12)

$88.67

Question:

Will this plug work on my trailer. I want to replace the who plug. When I pull my trailer, I get a message that the trailer brake is disconnected. Also, if this plug is compatible with my trailer, what connectors do I need to put on the end of the new wires? Would they be eye connectors? If so, do you have them in stock as well?

asked by: Mark S

Expert Reply:

For you I recommend the Trailer Wiring 7-Way Upgrade Kit # HS381-9000. This comes with an 5 foot 7-Way connector, wire loom, a junction box, and ring terminals. Everything you need to install a 7-Way. The junction box makes troubleshooting lighting and other problems much easier.

If you already have a junction box then you can use # H20044 and just use ring terminals. You would need 4 of # DW05737-1 and 3 of # DW05740-1.

I have also included some links on testing and troubleshooting brake controllers because the issue may not be with the wiring harness.

expert reply by: Michael H