Can 7K Timbren Axle-Less Trailer Suspension be Installed on Food Trailer
Updated 05/11/2018 | Published 05/10/2018
Products Featured in This Question
Question:
I have a 28ft Food trailer that was set up with 5200lb tandems the trailer weighs a total of 13200 lbs! Fully loaded for the road, yes the the trailer conversion co. screwed up and will not make good! so can I put the Timbren 7k axle assembly with hubs brakes and correct tires obilln this SAFELY? I would also need the 4 as the 5200 have, PLEASE HELP ME IM IN A BAD SPOT!
asked by: Bill P
Expert Reply:
You can absolutely replace the axles on your food trailer with the Timbren Axle-Less Trailer Suspension System # TASR7KS01. This 7,000 pound rated system can be used for a 2-axle setup, so it will work nicely on your trailer. It will provide you with a safe, smooth, and quiet ride, and will fit any frame width.
I have attached an installation video for this system so you can get a better idea as to how it installs and operates.
Then for a hub and drum assembly that will work well, I recommend the Dexter # 42866UC3-EZ. The bearings in this hub will fit the spindles on the Timbren System and it is designed for 7.000 pound axles. The hubs feature an 8 on 6-1/2 inch bolt pattern, which you will need to make sure matches up to your existing wheels.
For compatible brake assemblies, you can use the Dexter Electric Trailer Brake Assembly # 23-106 for the Right Hand and # 23-105 for the Left Hand.
The only thing I recommend verifying is that the current 5,200 pound axles on the trailer are/were the trailer's weakest component. You will need to make sure that the trailer frame itself is also capable of handling the 13,200 pound loaded weight. Upgrading the axle will only increase the trailer's capacity if every other component is also rated for the higher limit.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 7,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- 7000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is Max Air Pressure for Lionshead Steel Modular Trailer Wheel LH44ZR
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: How Many Pumps of Grease Should be Put in an Axle
- Q&A: How Close to Trailer Weight Should Capacity of Trailer Leaf Spring Be
- Q&A: Can 6,000 Lb 6 on 5-1/2 Hubs Be Swapped Out for 7,000 Lb 8 on 6-1/2 Hubs
- Q&A: Using 6000 lb Hubs on 7000 lb Axle
- Q&A: Longer U-Bolts for Installation of Roadmaster Comfort Ride Leaf Spring Suspension Kit
- Article: How to Raise Your Travel Trailer Height
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Where to Position the Trailer Axle?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Choose a Trailer Hitch Coupler
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)