Can a Gooseneck to 5th Wheel Trailer Coupler Adapter Be Used with Bolts Instead of Locking Pins

Updated 04/17/2018 | Published 04/14/2018

Question:

Hi I have a gooseneck trailer that has a hand crank to adjust the ride height I was wondering if y’all offered this type as my trailer doesn’t have a locking pin it only has bolts

asked by: James

Expert Reply:

As long as the inner diameter of the outer tube on your gooseneck trailer has a 4" wide opening then the Gooseneck to 5th Wheel Trailer Coupler Adapter part # KPG5-Q25-IP will still work for you. We do not have anything specifically designed for your trailer but the adapters are very universal with just slight modifications.

On the adapter there are four 7/8" diameter pre drilled holes for vertical adjustment. The adjustment holes can be secured by either a locking pin or bolt. If the bolt your trailer uses now is a different size or you need it in a different location, there are an additional two unused sides that you can use to make the adapter work for you.

I have attached a review video of the adapter for you as well.

expert reply by: Conner L