Replacement Race and Seal for Bearing # LM11949
Updated 04/17/2018 | Published 04/14/2018
Products Featured in This Question
Question:
I am looking for a seal and a bushing to match a LM11949 bearing. Can you tell me the part numbers for these items?
asked by: Jeff L
Expert Reply:
The Replacement Race for # LM11949 Bearing is # LM11910. The seal is not as easy to determine, so I recommend using a digital caliper like # PTW80157 to measure the inside of the hub and the outside of the spindle to give you the inner and outer diameter for the seal needed. These measurements need to be precise or you will have a leak that can cause serious problems on your trailer. I've attached an article to assist and have also linked the page to your seal options.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .75 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Availability Of 5 on 4-1/2" Hubs For A 3/4" Spindle
- Q&A: Trailer Idler Hub That Has a 5 on 4-1/2 Lug Pattern and Uses LM67048 and LM11949 Bearings
- Q&A: Determining Correct Replacement Axle For Older Axle With Obsolete L44649 LM11949 Bearing Combination
- Article: Trailer Wiring Diagrams
- Q&A: Curt CrossWing or Sliding 5th Wheel Hitch for a 2021 Ram 2500
- Q&A: Replacement Light for RV Bargman 84 Series Trailer Light
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Q&A: Availability of 72 inch Long Tandem Axle Trailer Fender in Diamond Plate
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle