What Grade Steel is Used to Make Brophy Clevis Pin for 2" Clevis Mount # CP20
Updated 04/14/2018 | Published 04/13/2018
Question:
What grade 5 or 8? Thank you
asked by: Al
0
Expert Reply:
Brophy Clevis Pin for 2" Clevis Mount # CP20 doesn't have a grade like 5 or 8 like a bolt would. It is rated differently. I asked my contact at Brophy and he said it is "1" Cold Rolled Round bar 1018 material."
According to some metal-working resources "1018 cold rolled steel is a low carbon steel with good case hardening qualities. It has higher manganese content than other low carbon grades, such as 1020."
expert reply by:
Michael H
0
Product Page this Question was Asked From
Brophy Clevis Pin for 2" Clevis Mount - Zinc Plated - 6-1/8" Long x 1" Diameter
- Hitch Pins and Clips
- Clevis Pin
- 4-1/8 Inch Long
- 1 Inch Diameter
- 4-1/8 Inch Span
- Brophy
more information >
Continue Researching
- Q&A: Bolt Hole Dimension of Buyers Products Black Receiver Tube 3371804055
- Q&A: Recommended Pintle Hook for the Reese RP38186
- Q&A: Conversion Kit to Upgrade Manual Dometic Awning to Power Awning
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Complete Flat Towing System for 2000 Ford Ranger 2WD Manual Transmission Truck
- Q&A: Distance Between the Tangs of the Gen-Y 2-Tang Clevis # 325-GH-039
- Q&A: Recommended Replacement Converter For A Parallax 7300 Series Power Center
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control