Wheel Stud Recommendation to Fit Dexter 7,000 lb Hubs
Updated 08/26/2020 | Published 04/07/2018
Products Featured in This Question
Question:
Will these fit Dexter 7000 lb axel
asked by: Neal
0
Expert Reply:
Dexter 7,000 lb axle hubs come with either 1/2 inch wheel studs like the part # RG03-080 that you referenced or 9/16 inch diameter studs like the # 7-257. You'd need to measure what you have to know for certain.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" - Qty 4
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-3/4 Inch Long
- Redline
more information >
Continue Researching
- Search Results: 1/2 inch stud
- Search Results: wheel stud
- Search Results: 8~393
- Search Results: dexter oil bath
- Search Results: 1/2 inch studs
- Search Results: wheel studs
- Shop: Dexter Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" - Qty 4
- Shop: Trailer Hub Oil Seal, 3.376" OD, 2.375" ID
- Q&A: Replacement Trailer Wheel Studs With 1/2 inch Diameter
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Drive-in Wheel Bolt for Trailer Wheel Hubs - 9/16" Diameter x 2-5/16" Long - Qty 1
- Shop: Unitized Oil Seal for Trailer Hubs
- Search Results: 9/16 wheel studs
- Video: A Closer Look at the Reese Steadi-Flex Weight Distribution System w/ Sway Control
- Video: Reese Steadi-Flex Weight Distribution System with Sway Control Test Course
- Q&A: What Is The Torque Specifications On A 9/16 Inch Lug Nut
- Q&A: Common Torque Specifications for Lug Nut Size
- Article: Determining Trailer Tongue Weight
- Q&A: Determining The Correct Replacement Wheel Studs For A 2018 grand Design Reflection 28BH
- Q&A: Trailer Ball Height to Increase Tongue Weight to Help with Sway Control on a Single Axle Fish House
- Q&A: Lug Nuts for 7K Dexter Axle
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Q&A: Recommended Trailer Tire Size and Load Range for a 14K Tandem Axle Horse Trailer
- Video: Detailed Breakdown of the Tandem Axle Teardrop Fenders w/ Backing Plates
- Video: Trailer Hub Wheel Stud, Drive-In, 9/16" x 2-1/2" Review
- Shop: Tonneau Cover
- Shop: Tool Box
William K.
8/12/2020
Can you replace 1/2x20 studs in the hub with 9/16x18 studs by driving one out and the other in.Or, does it take some machining.This new hub I believe made by rockwell.tks.