How to Determine Whch Lippert Trailer Shock Kit Fits Trailer
Updated 04/04/2018 | Published 04/03/2018
Products Featured in This Question
Question:
How do I know what axle 3in. or 2 3/8 2016 keystone bullet premier 30ripr
asked by: AL
0
Expert Reply:
The simplest answer would be to take a tape measure out to your trailer and measure the diameter of the axles. Or you can go by the capacities of the axle that the trailer has. A 2-3/8 inch axle is a 3,500 lb axle and a 3 inch axle is normally a 5,200 to 7,000 lb axle.
The shock kit part # LC281255 is for 2-3/8 inch axles and the part # LC281281 is for 3 inch axles.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- Single Axle
- Lippert
more information >
Continue Researching
- Q&A: What is Warranty of Roadmaster Comfort Ride Triple Axle Add On Kit
- Q&A: How to Install Lippert Bolt-On Shock Mount Kit with Heavy Duty Gas Shocks for 3 Inch Axles
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How to Position the Lippert Shocks on a Single Axle Trailer
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Q&A: Can Trailers Have Shock Absorbers Installed
- Q&A: How Does The Redarc Tow Pro Link Brake Controller Help With Trailer Sway On The Highway?
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Q&A: Correct Orientation and Ability to Mount Lippert Shock Kit on Inside of Frame Rail
- Q&A: How to Install Lippert Bolt-On Shock Mount Kit LC281255
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Determining Trailer Tongue Weight