Are Brake Flange Mounting Bolts Included with the Kodiak Disc Brake Kit # K2HR35D
Updated 02/26/2018 | Published 02/25/2018 >
Products Featured in This Question
Question:
are bolts the 8 bolts that hold the brake brakect included Kodiak Disc Brake Kit - 10inch Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs Item # K2HR35D
asked by: Leston
0
Expert Reply:
We do have some hardware that you can use, but the 4 bolts included with the Kodiak Disc Brake Kit # K2HR35D are used for mounting the calipers to the brake mounting flange.
To install the brake mounting flange you can use the Brake Mounting Bolt # 7-75 and the Brake Mounting Hardware Kit # BIK-00
expert reply by:
Jon G
0
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: Which Caliper Should Be Used With The Dexter 9-3/4" Hub-and-Rotor Assembly DX82UR?
- Q&A: Brake Upgrade Reccomendation For My UFP DB-42 Oil Bath Brakes
- Q&A: Will 3,500 lb Kodiak Disc Brake Kit Fit 2012 EZ Loader Boat Trailer
- Q&A: Availability of Replacement Parts for Atwood 85736 Brake Actuator
- Q&A: Which Trailer Electric Over Hydraulic Actuator is the Best
- Q&A: Replacement Hub/Rotor Assembly for a Dexter Boat Trailer Axle DX67HR
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box



