Compatibility of Curt Ball Mount # C45310 with Curt Class III Hitch on 2005 Suzuki Grand Vitara

Updated 02/20/2018 | Published 02/19/2018

Products Featured in This Question

Curt Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 9-3/8" Long - 10,000 lbs

(3966)

$45.44

2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000

(3995)

$20.94

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(79)

$303.93

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(39)

$39.04

Question:

Hello, Can you please tell me if the items C45310 And A-90 will be fit my CURT 13517 Class 3 Trailer Hitch Thanks

asked by: Andreas

Helpful Expert Reply:

The Curt Ball Mount # C45310 referenced in your question is indeed compatible and will work nicely with your Curt Trailer Hitch Receiver # C13517. This particular Class III hitch is also confirmed to fit your 2005 Suzuki Grand Vitara. The 2 Inch Hitch Ball # A-90 that you also mentioned features a 1-1/4 inch diameter shank so it will work perfectly with the ball mount.

Since it sounds like you will be doing some towing, I recommend the Curt T-Connector Vehicle Wiring Harness # C55372 if you do not already have a trailer connector installed. This custom-fit harness will install by connecting directly to the built-in ports located behind the driver side trim panel. This will provide you with a 4-Way connector at the rear bumper of your Grand Vitara to connect with and power the trailer's basic signal lights.

I have attached the installation instructions for this harness that you can use for reference.

expert reply by: Chris R