Trailer Tire Recommendation to Replace 4.00/4.80 on Harbor Freight Trailer
Published 02/13/2018
Question:
I have 4.00/480 4lug harborfrieght trailer tires and haul 220 gallons of water then lift it off the wheels in garage. What would be the best load range for the weight and lastbut not least on dirt road driving 3miles at 10 mph. I need the best. Can you help !!?
asked by: Jack C
Helpful Expert Reply:
The best tire upgrade we can recommend for the wheels you have would be going to the slightly larger tire size of 5.70-8 like the part # AM10013. This has a Load Range of D and a capacity of 1,075 lbs at 100 psi and would work well for your application.
Product Page this Question was Asked From
Kenda K353 Bias Trailer Tire - 5.70-8 - Load Range D
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range D
- 5.70-8
- 8 Inch
- Kenda
more information >
Continue Researching
- Q&A: Is Larger 5.70-8 Trailer Tire a Better Option to Replace 4.80-8
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: Trailer Tire Sizing
- Q&A: What Does 5.70 and 8 Mean On a 5.70-8 Trailer Tire
- Q&A: Larger Tire Size Recommendation for Trailer with 4 Lug Hubs
- Q&A: Recommended Trailer Tires Size 5.70 x 8 for Highway Speeds
- Q&A: Using 1 or 2 Electric Jack Motors for Bulldog Single Speed Jacks with 12,000 Pound Capacity
- Q&A: What Is The Purpose of the 3 Places A Wheel Steps Down From Outside Edge to Inside?
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: How to Measure Your Trailer Wheel Bolt Pattern