Peterson Piranha LED Small Trailer Clearance Light # 168R Recommendation for a 2001 Dodge Truck
Updated 06/29/2011 | Published 06/27/2011 >
Products Featured in This Question
Question:
Is the Peterson 168R / 168A really polarity sensitive? Im considering doing a quick and dirty side marker / turn on my 01 Dodge truck pinch weld and camper low body. Ive had it suggested that connecting both wires to power running lights / turns will give me running lights and blinkers. Im planning ~20 lights. Is there a better product to fit my needs?
asked by: Russell B
Expert Reply:
On this Peterson Piranha LED Small Trailer Clearance Light # 168A that you referenced there are two wires for this unit. The yellow wire will be the power wire, whereas the white wire will be the ground wire. In order for this light to illuminate it will need power and a ground to complete the circuit. If you attach power to both of the wires it will not illuminate. You will want to find the rear tail light circuit and tap into that circuit using a Circuit Tester Kit # 40376 to first find the correct wire, and then use a Quick Splice Locks # 34466000-5 to splice into the wire.
Next, you will want to find a suitable ground for the white wire on your 2001 Dodge truck, I would recommend using a clean, metal surface either on the body or the frame of your vehicle.
Since you are looking for a turn/brake light you would want a lens that is red for the stop function otherwise it would not be a legal stop indicator.
I would recommend using the red LED version of this light. You would want a Peterson Piranha LED Small Trailer Clearance Light # 168R.
Product Page this Question was Asked From
Piranha Slim-Line LED Mini Clearance or Side Marker Light - Submersible - 2 Diodes - Amber Lens
- Trailer Lights
- Clearance Lights
- Marker
- Oval
- Surface Mount
- Submersible Lights
- LED Light
- 2-5/8L x 3/4W Inch
- Amber
- Peterson
more information >
Continue Researching
- Q&A: Replacement Bearing Kit for a # 42 Spindle on a 8,000 lbs Axle
- Q&A: Replacement Door Hinges for a 1990 Sooner 2H Slant Horse Trailer
- Q&A: Parts Needed To Add Electric Drum Brakes To A Flatbed Utility Trailer
- Q&A: Correct Replacement for Dexter Leaf Spring 072-078-00
- Q&A: Brake Pads For Kodiak 250 Calipers
- Article: How to Replace or Install an RV Roof Vent
- Q&A: Solution for Damaged Elixir Roof Vent Gear
- Q&A: Is it Normal for Super Springs Suspension Stabilizers to Be Noisy on Bumpy Uneven Roads
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Mount a Truck Bed Camper

