bing tracking image
Q & A Icon

Parts Needed to Flat Tow 2016 Ford Fusion Energi Behind Motorhome  

Updated 01/24/2020 | Published 01/15/2018

Question:

I have a 2016 Ford Fusion Energi that I need to flat tow behind my motorhome. What would be the most affordable hitch for the quality? The car weighs 39000 pounds. I would like to find a secondhand one to save some money would you recommend a used one? I have to have someone add a brake system to my motorhome, also. Seems it would cost me about $3000, total.

0

Expert Reply:

We have the parts you'd need to flat tow your 2016 Ford Fusion Energi behind your motorhome. For that we have the base plate kit part # RM-524437-4 which is a confirmed fit and will work well.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
0
Jameson C
Clint M. profile picture

Clint M.

1/23/2020

I have a 2016 Ford Fusion Eco Boost. Can it be flat towed and what would I need?

Jacob H. profile picture

Jacob H.

1/24/2020

You can most certainly flat tow your 2016 Ford Fusion. All of the parts that Jameson has listed are the same parts that you will need. The only thing that I would recommend is a different breaking system. The Stay-N-Play Duo # SM99251 by Demco is a more invasive install but it looks much cleaner when its installed and you won't even know it's there. All you will see is a plug on the front bumper

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>