Yakima Roof Rack Track System for a Leer 700 Hard Tonneau Cover
Published 01/11/2018
Products Featured in This Question
Question:
Hey folks, I have a Leer 700 hard tonneau cover, and would like to get a roof rack on it. The cover itself is shaped, so a tracked system will not work. I have alot of yakima parts crossbars, etc so if they make a fixed point mount for the cover, that would be great. In anycase, Id like to know my options. Thanks,
asked by: Joe
Expert Reply:
I do have an option for your Leer 700 Hard Tonneau Cover but you are going to want to install crossbars that attach to a track system as this will allow for more clearance in reference to the raised center section on the tonneau cover. In order to attach the crossbars you will first need to install the tracks and for that I recommend the Yakima Roof Racks part # Y01135 which are 60" long. Once the tracks are in place you can then add the Yakima Landing Pads with part # Y00221 and the Yakima Control Towers with part # Y8890027. Then to complete the system I recommend the Yakima Round CrossBar part # Y8810025 which is 66" long but can be cut to fit your exact application. Feel free to substitute any parts you may already have but the round bar system is the only one that Yakima has that works with the tracks at this time.
In order to attach 2 of the Yakima CrossBars you will need 4 Yakima Control Towers and 2 Yakima Landing Pads. A few additional items you may find of use are the Yakima EndCaps part # Y8007026 and the Yakima Same Key System part # Y07204.
Product Page this Question was Asked From
Featured Help Information
Instructions
Continue Researching
- Q&A: Can I Use Yakima SkyLine Towers with Thule Tracks?
- Q&A: How to Determine Placement of Yakima 60" HD Tracks on an ARE Truck Cap
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Q&A: Dimensions of Yakima Anchor Plate A Part # Y8810074 and 60-Inch Track for Roof Racks
- Q&A: Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
- Q&A: How Many Bolts are Needed When Installing the Yakima 60" Tracks for Roof Racks # Y01135
- Article: How to Install a Roof Rack
- Q&A: Can the Yakima Tracks for Roof Racks Be Trimmed Down and Still Have the End Caps Used?
- Article: Roof Rack Information
- Article: How to Measure for Trailer Hitch Drop
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Trailer Wiring Diagrams
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?